Isokern Garden Fireplace

The Schiedel Isokern Garden Fireplace is the perfect choice for any outdoor space looking for a cosy and comfortable atmosphere. Its construction from Volcanic Pumice sourced from the Hekla Volcano in Iceland provides the perfect insulation for the fireplace, allowing for a safe and spectacular focal point for any garden. The kit comes with everything needed for assembly, including the chimney blocks, lip glue, firebrick, and firebrick mortar, as well as a render to seal in the joints or give it a full rendered finish.

The 500 model also features a log retainer and barbecue grill, as well as an additional log store available as an extra. The larger 950 and 1200 models includes a capping, with a rain cap as an optional extra on all models. The construction of the Isokern Garden Fireplace is straightforward and can be built freestanding, raised, or against a wall. The chimney height can even be increased by purchasing extra blocks.

The Schiedel Isokern Garden Fireplace offers a range of benefits, from easy construction to all materials being included, as well as its load bearing capabilities. Installation of this fireplace will bring a warm and inviting atmosphere to any outdoor living space. It is the perfect choice for anyone looking to get the most out of their garden.

PDFIsokern Pumice Brochure

Choosing an Isokern garden fireplace

Schiedel makes the Isokern garden fireplace in three sizes. All three are built from the same volcanic pumice blocks as Isokern house chimneys, and all are load bearing. The difference is the fire opening and how much room the fireplace takes up. The 500 is the compact model, and the only one that comes with a barbecue grill as well as a log retainer, so it doubles as an outdoor cooker. The 950 is Schiedel's most popular size. The 1200 gives the widest open fire for larger gardens and terraces.

Garden fireplace sizes (Schiedel UK Outdoor Living brochure, April 2024)

500 (small)950 (medium)1200 (large)
Schiedel code169566169567169568
Fire opening (width x height)510 x 540mm940 x 720mm1180 x 720mm
Depth440mm overall, about 315mm inside after firebricks640mm640mm
Overall width685mm1090mm1330mm
Height as supplied2155mm2250mm2250mm
Built weight460kg960kg1100kg
Delivery1 pallet1 pallet2 pallets
Included extrasLog retainer and barbecue grillLog retainerLog retainer

Every model can be made taller with extra chimney blocks, and the 500 can also have optional side log stores. If you want to cook, the 500 is the one with the grill. If you want a fire to gather round, the 950's opening is almost twice as wide as the 500's, and the 1200's more than twice.

Siting and the base

  • The finished fireplace is very heavy: from 460kg for the 500 to 1100kg for the 1200. Schiedel recommends a reinforced concrete base at least 100mm thick, so the build cannot sink or lean.
  • Do not build it directly onto decking. Schiedel's instructions for the 500 call for a firm foundation.
  • Leave 75mm between the fireplace and any wooden or other combustible material, such as a fence or summer house.
  • Schiedel describes the fireplaces as suitable freestanding, raised or built against a wall. Check delivery access for the pallet, or two pallets for the 1200.

Building it

On the 500, the kit goes together in courses: the base sections, the base plate, the firechest and gather, then the chimney blocks. Each joint is bonded with the lip glue supplied, in 15–20mm beads, checking each course is level as you go. The firebricks line the fire opening and are set in the firebrick mortar included in the kit. Finally, the outside is rendered, either to seal the joints or as a full rendered finish.

Schiedel advises that the heat-resistant render is mixed and applied by a skilled professional, because it needs more pressure to apply than ordinary plaster. Cracking and bubbling usually come from moisture trapped behind the render. To avoid it, prepare the surface properly, use the right mix ratio without too much water, and do not render a damp surface or in humid weather. If you are not building straight away, keep the lip glue, render, firebrick mortar and instructions dry indoors. Schiedel does not cover damage from incorrect storage.

Isokern garden fireplaces: frequently asked questions

Which Isokern garden fireplace has a barbecue?

The 500. It comes with a barbecue grill and fixing brackets as well as a log retainer. The 950 and 1200 include a log retainer only.

What base does a garden fireplace need?

A firm foundation. Schiedel recommends a reinforced concrete base at least 100mm thick, and the fireplace should not be built directly onto decking.

How close can it be to a fence?

Schiedel's instructions specify 75mm between the garden fireplace and any wooden or combustible material.

Can I make the chimney taller?

Yes. Extra chimney blocks can be added to any of the three models to increase the height.

Can I build it myself?

The blocks are designed for straightforward assembly with the lip glue supplied, and the kit includes the firebricks and mortar. Schiedel recommends that a skilled professional applies the render finish.

The range:Garden Fireplace 500 · Garden Fireplace 950 · Garden Fireplace 1200 · more outdoor ideas in BBQs and pizza ovens.


Stovesaver Blog

Chesneys Mk3 Wood Burning Stoves in New Builds: Compliance, SAP Boosts, and Cost-Saving Strategies


on
In the world of new build homes, where every decis...

Isokern Pumice Liners: The Gold Standard for Safe, Efficient Chimneys

Exploring Isokern’s Range of Gathers and Firechests for Superior Chimney Solutions