- Home
- Isokern Pumice Chimney Systems
Isokern Pumice Chimney Systems
Isokern Pumice Chimney Systems
Schiedel Isokern Pumice chimney liners, chimney systems and accessories. Includes Schiedel Isokern, the leading manufacturer of pumice systems, including the fantastic outdoor and indoor magnum firechests / fire kits. UK express delivery is available on all stock items, including Leca, lip glue and the liners. The double module Pumice system available in DM36 DM44 & DM54.
Isokern DM36 Square Casing 360mm square
Isokern Pumice 150mm Chimney Liner Pack 4.8 Metres
Isokern Chimney Systems
Isokern Pumice 150mm Chimney Liner Pack 4.8 Metres
Isokern Pumice Chimney Liner - All diameters 150mm to 600mm
Isokern Chimney Systems
Isokern Pumice Chimney Liner - All diameters 150mm to 600mm
Isokern DM36 150mm i/d flue block
Isokern Chimney Systems
Isokern DM36 150mm i/d flue block
Isokern Dm54 Square Casing 545mm square
Isokern Chimney Systems
Isokern Dm54 Square Casing 545mm square
Isokern Pumice 150mm Chimney Liner Pack 6.0 Metres
Isokern Chimney Systems
Isokern Pumice 150mm Chimney Liner Pack 6.0 Metres
Isokern Pumice Liner 45° Bends -All flue diameters
Isokern Chimney Systems
Isokern Pumice Liner 45° Bends -All flue diameters
Isokern DM36 150mm i/d starter flue block
Isokern Chimney Systems
Isokern DM36 150mm i/d starter flue block
Isokern Liner Support Blocks - All flue diameters
Isokern Chimney Systems
Isokern Liner Support Blocks - All flue diameters
Isokern chimney systems are lightweight, extremely efficient and suitable for wood, solid fuel / multifuel, oil and gas, but not for condensing appliances, including biomass and pellets. Straight chimneys with a ventilated top can have zero clearance to combustibles, and with their high insulative characteristics they are extremely efficient, which means less heat loss, producing better performance and draw, a perfect combination for your high efficiency stove or fire.
Isokern pumice is tested to and meets: CE Certified to EN1858 with the designation T450, NI, D, 3, G (00).
Isokern also produce the Isokern Pumice complete garden BBQ kit A complete kit to create your own garden BBQ. Comes with modules and blocks to build, adhesives, firebricks, log retainer and BBQ grill and render to complete the look. Currently available in the 500 model only but with optional log store. Can be built freestanding, raised or against a wall and additional blocks can be purchased if you want to increase the height.
If you are looking for a reliable, efficient and safe chimney system then look no further than Schiedel Isokern Pumice. With their wide range of chimney systems, liners, accessories and fire kits, you are sure to find the perfect solution for your home. Whether you need a high efficiency double module system or a complete garden BBQ kit, Isokern have the perfect system for you. All of their products are rigorously tested to meet CE certified standards, meaning you can be sure you have the highest quality products available. With UK express delivery available on all stock items, you can have your products quickly and easily, so you can start enjoying your new system as soon as possible. So if you are looking for a reliable and efficient chimney system then Isokern is the perfect choice.
Isokern Pumice Brochure Try the Isokern Liner Assistant Calculator
Which Isokern pumice system do you need?
Schiedel Isokern makes four kinds of pumice product. The right one depends on whether you are building a new chimney, lining an existing one, creating an open fireplace, or building a fire outdoors. Many projects combine two of them: a Magnum firechest under a DM chimney, for example, or a stove in a recess connected to a liner run.
The Isokern range at a glance
| System | What it is | Choose it when | Sizes (Schiedel UK) |
|---|---|---|---|
| DM double module | A complete system chimney: inner pumice flue blocks inside outer pumice casings, with an air gap between | You are building a new chimney, inside or outside the house, without a masonry stack | DM36 (150mm flue), DM44 (180 or 200mm), DM54 (300 or 345mm) |
| Liner packs and single liners | Rebated pumice flue liners, clad in brick, block or stone and insulated with clay aggregate | You are relining an existing masonry chimney, or building one in masonry | 15 diameters from 150mm to 1000mm |
| Magnum firechests and gathers | Flat-pack fireplace recess and gather, lined with firebrick | You want a built-in open fire | Fire opening widths from 500mm to 1250mm |
| Garden fireplaces | A complete outdoor fireplace and chimney kit | You want a fire or barbecue in the garden | 500, 950 and 1200 models |
Why pumice?
The pumice Schiedel uses comes from the Hekla volcano in Iceland. It is a natural insulator, so flue gases reach working temperature soon after lighting and stay warm as the fire dies down. A warm flue draws better and is less likely to form condensation and soot. Pumice expands and contracts very little as its temperature changes, which reduces the risk of cracking. It is also light enough for one person to lift and build the blocks. Schiedel notes that Isokern chimneys have been installed in Europe for over 60 years, and that a correctly installed, operated and maintained system could last the life of the dwelling.
Approvals
- DM double module: CE certified to EN 1858, TÜV certificate 0036 CPR 90219 001.
- Pumice chimney liner: CE certified to EN 1857, TÜV certificate 0036 CPR 90219 002, designation T600 N2 D 3 G.
- Magnum firechest: tested at the Fraunhofer Institut, Stuttgart, certificate P8-094/2006.
Connecting the appliance
Between the stove and the pumice chimney you need a connecting flue pipe. Schiedel has tested and approved its Prima Smooth single wall pipe, in 316L grade stainless steel with 0.6mm or 1mm walls, for this job. For a stove in a recess, Schiedel recommends at least 600mm of flue pipe before the connection to the chimney. A stainless steel adaptor, sealed with fibre rope, makes the joint at the support block.
After installation
- Have the chimney tested under Approved Document J, and fix the completed chimney notice plate in the home, ideally near the consumer unit.
- Leave it at least 72 hours before use, then burn only small fires for the first week.
- Sweep at least twice a year, before and after the heating season. Use a medium density polypropylene brush the same diameter as the flue, never a steel brush.
- Burn approved fuels or dry seasoned wood. Unseasoned wood and slow burning solid fuel cause excess soot and condensation.
Isokern pumice systems: frequently asked questions
What is the difference between Isokern DM and Isokern liners?
The DM is a self-contained chimney: its outer pumice casing forms the chimney wall, so it does not need a brick stack. Liners are the flue only. They must be surrounded by at least 100mm of brick or blockwork with clay aggregate insulation, so they suit masonry chimneys and relining.
Which Isokern size suits a wood burning stove?
Follow the flue size in your stove manufacturer's instructions. Schiedel lists the DM36, with a 150mm flue, for smaller output inserts, stoves and cookers, and the DM44, with 180mm or 200mm, for inserts, stoves and small open fires. Liners start at 150mm.
Can I build an open fire with Isokern?
Yes. A Magnum or standard firechest with a gather creates the fire opening, and a DM or liner chimney goes above it. The Magnum range gives openings up to about 1.2m wide.
How long does an Isokern chimney last?
Schiedel says that if it is correctly installed, operated and maintained, an Isokern pumice system could last the life of the dwelling.
Tools:DM Calculator · Liner Calculator · Leca and Lip Glue Calculator









