Code 131201
£0.00
£166.20
Isokern C18 Concrete Gather
Code 131201
£0.00
£166.20
(Min 1)
Save
Earn 0 reward points with this product.

Sorry we're out of stock!

Enter your email address below and we’ll notify you as soon as it becomes available.

  • Description

    Isokern concrete gathers are made using re-bar re-enforced concrete and made in a variety of sizes to suit different size flue requirements. The C18 is made for a 800mm wide finish opening x 450mm deep with a flue size of either 300mm (12”) internal measurement. Concrete gathers can support the weight of the liner and light expanded clay aggregate as required. You can increase the chamber size by using lintels, but the overall finish size of the fireplace opening does require the flue sizing accordingly and may affect performance. UK regulations require a minimum flue cross section of 15% the total opening, this calculation will generally achieve a open fireplace that performs as required and will minimise the risk of spillage into the room. Flue gathers are generally used for open gas or solid fuel fires beneath. If you are installing an appliance with a flue spigot such as a wood burning stove, then Isokern make a support block which come with optional stainless steel adapters for a safe and long lasting joint.

  • Technical Information

    isokern-gather-table-and-dimensions.png

Send this to a friend

Complete the form below and we’ll send the product details to a friend